HARRIER BOOK 2

Vehicle Platform: OSPREY

ECU Name: Hella Body Control Module (BCM) DTC

Troubleshooting Data

Version: 1.4

Date: 15 May 2018

Author: Body CoC

Page: 168 of 855

TATA MOTORS Ltd.

This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author.

B2247– 11: Right Position Lamps– Short to Ground

Overview:

ISO Code

B2247- 11

Customer Symptom

5. Right Position Lamps always OFF.

Fault Effects (On Vehicle)

3. Right Position Lamps always OFF.

Lamp Status (If Any)

Always OFF

Fault Detection Condition

This fault gets logged by BCM when Right Position

Lamps output is short to ground

Normal Operating Condition

If the IGN is KeyIN or Keyout/Accessory/On and Main

beam / Dipped beam are ON or Position lamp switch

signal is active, Position lamp will turn ON.

Probable Trouble Area

1. BCM connector Fault

2. Right wiring harness (Right Position Lamps

output wire) short to ground

3. Lamp damaged

4. BCM ECU fault

5. Right Position Lamps mating connector fault

Healing Condition

1. Ignition OFF



2. Clear DTC Command

Component Details:

Position lamps are on the corner of the car (front/rear and left/right) . If the IGN is KeyIN or

Keyout/Accessory/On and Main beam / Dipped beam are ON or Position lamp switch signal is active,

Position lamp will turn ON.

Preliminary Checks:

1. Check Battery Voltage (12.5 V & above)

2. Check ECU pins for oxidation, bending & damage.

Trouble Shooting:-