Vehicle Platform: Tiago,Tigor & Osprey
ECU Name: Hella Body Control Module (BCM)
DTC Troubleshooting Data
Version: 2.0
Date: 22-10-2018
Author: Parag K
Page: 54 of 737
Copyright ©
TATA MOTORS Ltd.
This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author.
DTC’s confirmation:-
After rectification, ensure the following points before handing over the system to the customer
1) Battery Voltage is between 9 to 16V.
2) Replacement of ECU.
3) Drive the vehicle on road and check the assistance.
Circuit Schematic Diagram:-
N/A
Component Location & Image:-
N/A
Connector Location: -
N/A
Connector View & Information: -
N/A
Inspection Method: -
N/A
Yes
No
Is there same
DTC
observed?
Replace the
ECU
Stop
Reset the ECU. Remove the BCM ECU
power supply connector from ECU and
reconnect after about 5 minutes
1. Clear the DTC from the memory
2. Turn the ignition switch off and again
turn it on and start the engine.
3. Check for DTCs
A




