1296 / 1906
STEERING
38
5. Never store / transport steering gear with
bellows / feed pipes fouling with other objects.
6. Never remove port plug before connecting
with mating parts.
7. Do not remove the feed pipe assembly from
the gear port; remove it only when replacing
the feed pipe.
8. Never use cotton waste which will cause
contamination.
9. Do not adjust ball joint nuts except during
wheel alignment
10. Never lift steering gear by holding IBJ’s.
NOTE:
Bellow is a seal. Do not use sharp tools near
bellows if it can damage bellows.
CAUTION:
Damaged bellow or absence of clip can cause
water ingress and subsequent failure of
Power steering.
11. Do not remove the protective cap from the
input shaft during transit or before assy.