Background Image
Table of Contents Table of Contents
Previous Page  1272 / 1863 Next Page
Information
Show Menu
Previous Page 1272 / 1863 Next Page
Page Background

STEERING

14

COMPLAINT

AS MAY BE NARRATED BY CUSTOMER

EXTERNAL

LEAKS

Loss of steering fluid.

Frequent adding of fluid is

required.

Oil wetness.

Changing oil puddle under vehicle after parking.

Leak at steering gear/pump/reservoir.

CONDITION

POSSIBLE CAUSE

REMEDY

Leak through

fittings/sealing

washers.

Improper tightness of fittings.

Tighten and clamp suitably to avoid loosening

under vibration.

End fitting/ sealing washer is

damaged or cracked due to

improper tightening.

Replace the end fittings/sealing washer and

tighten properly.

Leak through hoses

location

Loose connection.

Tighten and clamp suitably

Heat or age cracks

Replace the hose with new one.

Twisting or abrasion wear due

to improper routing/ fouling/

kinking/ twist.

Replace the hose and route and clamp suitably.

Leak through

Reservoir

Foaming or oil throwing out

due to air in the system

Check proper connection of suction line. Fill and

bleed the system.

Reservoir is overfilled.

Drain the oil from reservoir to proper level.

Broken

or

cracked

bracket/cover/shell of reservoir

due

to

improper

clamping/vibration.

Replace the reservoir assembly with new and

clamp properly.

Leak through Pump

hardened or

cracked

Through shaft seal, due to

defective seal Fill and bleed

the system. If it still leaks,

replace the pump

Remove the seal. If seal bore is OK and bleed the

system. If it still leaks.

Leak through Pump assembly

housing/ cover/ joint face

seals/“O” rings.

Replace the seals/”O” rings. If it still leaks, replace

the pump.

Leak through

Steering Gear

Assy.

Leak through Input shaft seal. Replace RAP

Leak from Cylinder

(Rack

tube)

through Rack seal into

right/ left bellows.

Replace RAP

Leak through pinion seal in

valve housing into RH bellows.

Replace RAP

Leak through feed pipes

connection to Rack tube at

flare nut.

Tighten the connection properly.

Cracked/damaged feed pipes. Replace feed pipes.