SAFARI

ELECTRICALS

c) Disconnect electrical connectors of master cum

follower for driver side door.

d) Disconnect bell crank lever link for front door

(inner lock link for rear door) from latch after

unlocking plastic clip. Disconnect solenoid link of

master cum follower from door latch after

unlocking the plastic clip.

e) Loosen mounting nuts and remove master cum

follower unit with mounting plate. Note the type

of master cum follower.

f) Follow the above procedure (‘a’ to ‘e’) for removal

of follower unit from co-driver side door, rear LH

door and rear RH door. Note the type of follower

unit.

g) Follow the above procedure (‘b’ to ‘d’) for removal

of follower unit from tail gate. Loosen mounting

screws and remove the follower unit from tail gate.

Inspection

Check proper operation of door handle, lever,

inner handle and door lock. Rectify for any defect.

Check the proper functioning of the replaced

master cum follower unit / follower unit on the

ring. Hold the output lever lightly to check that

unit is exerting force. If not, replace with the

working unit.

Installation of Master cum follower unit/

follower unit

a) For fitment of new master cum follower unit on

driver side door remove the mounting plate from

old master cum follower unit and fit on newmaster

cum follower unit. (New master cum follower unit

and old one should be same type)

b) Fit master cum follower unit along with mounting

plate on the door.

c) Assemble the solenoid link from master cum

follower to door latch. While fitment ensure that

knob and master cum follower lever is in same

mode i.e., both are in unlock position or in lock

position. Lock the connecting link in position by

plastic clip.

d) Assemble the bell crank lever link for front door

(inner lock link for rear door) to door latch. Lock

the connecting link in position by plastic clip.

e) Connect electrical connectors of the master cum

follower to wiring harness.

f) Follow the above procedure (‘a’ to ‘e’) for

installation of follower units on the co-driver side

door, rear RH door and rear LH door.

g) Do not disturb the adjustment of door handle link

and door lock link. If disturbed readjust and

ensure proper functioning of door handle and

door lock.

h) Check and ensure proper functioning of the

central locking system.

i) Fix plastic membrane, door inner trim. Refer body

group.

j) Check proper functioning of window winding.