1044 / 1428
ELECTRICALS
203
Sr.
No.
Displayed
DTC Code
DTC Description
Fault cause
Probable trouble Area
19 P2101 - 29
Throttle
actuator
control motor circuit
range/performance
-
signal invalid
Signal
Invalid
1) Need to check if any obstruction for
actuating throttle valve.
2) Check if the wiring connections are
proper for the ETC.
3) If signals are fine at breakout box end,
then need to check with harness line or
else fault ETC.
4) Faulty ECU.
20 P2100 - 13
Throttle
actuator
control
motor
circuit/open - circuit
open
Circuit open
1) Need to check if any obstruction for
actuating throttle valve.
2) Check if the wiring connections are
proper for the ETC.
3) If signals are fine at breakout box end,
then need to check with harness line or
else fault ETC.
4) Faulty ECU.
21 P101A - 7
Throttle
actuator
control throttle body
range/performance
-
mechanical failures
Mechanical
failures
1) Need to check if any obstruction for
actuating throttle valve.
2) Check if the wiring connections are
proper for the ETC.
3) If signals are fine at breakout box end,
then need to check with harness line or
else fault ETC.
4) Faulty ECU.
22 P3007 - 7
Throttle
actuator
control motor circuit
range/performance
-
mechanical failures
Mechanical
failures
1) Need to check if any obstruction for
actuating throttle valve.
2) Check if the wiring connections are
proper for the ETC.
3) If signals are fine at breakout box end,
then need to check with harness line or
else fault ETC.
4) Faulty ECU.
23 P3008 - 71
Throttle
actuator
control throttle body
range/performance
-
actuator stuck
Actuator
stuck
1) Need to check if any obstruction for
actuating throttle valve.
2) Check if the wiring connections are
proper for the ETC.
3) If signals are fine at breakout box end,
then need to check with harness line or
else fault ETC.
4) Faulty ECU.
24 P2101 - 17
Throttle
actuator
control motor circuit
range/performance,
indicates that the DLR
lies outside of the valid
control range - actuator
stuck
Circuit
voltage
above
threshold
1) Need to check if any obstruction for
actuating throttle valve.
2) Check if the wiring connections are
proper for the ETC.
3) If signals are fine at breakout box end,
then need to check with harness line or
else fault ETC.
4) Faulty ECU.