NANO

188

ENGINE 273 MPFI

•

Align crank shaft end in oil pump housing & water

pump impeller shaft end in balancer shaft’s end

slot.

•

Fit the water & oil pump housing on engine block.

•

Tighten all hexagonal mounting bolts of water &

oil pump housing on engine block to the specified

torque.

•

Apply

SEALANT LOCTITE 5910

black colour on

oil sump mating surface on block to ensure leak

proof joint.

NOTE

For best results, clean and dry all surfaces with a

residue free solvent.

Apply continous and even bead of silicone to one

surface surrounding all bolt holes.

Remove excess with knife at once. Assemble parts

immediately.

Do not squeeze out silicone by overtightening bolts.

Retorque will not be necessary.

Cures to touch in an hour and fully cures in 24 hours

measured at 21ºC and 50% relative humidity.

Allow more time in colder or dryer condition.

CAUTION

Risk:

Methyl Ethyl Ketoxime, whichmay cause eye

irritation and may cause sensation if in contact with

skin, if released during curing.

Safety:

Avoid contact with skin and eyes. Keep

out of reach of children.

First Aid:

In case of contact with eyes, rinse off

immediately with plenty of water and contact a

doctor or Poisonous Information Centre. If swal-

lowed, do not induce vomiting, contact a doctor or

Poisonous Information Centre immediately and

show the container or the lable. After contact with

skin, wash immediately with plenty of soap and

water. If effect persists, seek medical attention.