194 / 1006
188
ENGINE 273 MPFI
•
Align crank shaft end in oil pump housing & water
pump impeller shaft end in balancer shaft’s end
slot.
•
Fit the water & oil pump housing on engine block.
•
Tighten all hexagonal mounting bolts of water &
oil pump housing on engine block to the specified
torque.
•
Apply
SEALANT LOCTITE 5910
black colour on
oil sump mating surface on block to ensure leak
proof joint.
NOTE
For best results, clean and dry all surfaces with a
residue free solvent.
Apply continous and even bead of silicone to one
surface surrounding all bolt holes.
Remove excess with knife at once. Assemble parts
immediately.
Do not squeeze out silicone by overtightening bolts.
Retorque will not be necessary.
Cures to touch in an hour and fully cures in 24 hours
measured at 21ºC and 50% relative humidity.
Allow more time in colder or dryer condition.
CAUTION
Risk:
Methyl Ethyl Ketoxime, whichmay cause eye
irritation and may cause sensation if in contact with
skin, if released during curing.
Safety:
Avoid contact with skin and eyes. Keep
out of reach of children.
First Aid:
In case of contact with eyes, rinse off
immediately with plenty of water and contact a
doctor or Poisonous Information Centre. If swal-
lowed, do not induce vomiting, contact a doctor or
Poisonous Information Centre immediately and
show the container or the lable. After contact with
skin, wash immediately with plenty of soap and
water. If effect persists, seek medical attention.