706 / 1575
BRAKES
52
6.1.3 OVERHAULING
6.1.3.1 PRECAUTIONS
•
The pipeline should not be stretched or pulled
during fitment or during clamping.
•
The hoses should be fitted without twisting.
•
Make sure that there is no fluid leakage at the
hydraulic pipe joints.
•
During filling of brake fluid one should confirm
that the fluid is free from dust metal particles,
water or mineral oil contamination.
•
Make sure that there are no air bubbles in the
hydraulic circuit.
•
Inside surface of pipes should be free from dirt,
dust and metal particles. There should not be
any burr at the pipe end.
•
All the pipelines and hoses should be routed
properly and clamped at given clamping
points.