1015 / 1575
ELECTRICAL
195
ELECTRICAL
8.14 7. TELL TALES DESCRIPTION:
1. Turn Indicator (Left/Right):
Turn signal lamps can be operated only
when the ignition supply is ‘ON’ and by turn
indicator switch on the combi-switch. The direction
indicator arrow and on instrument cluster
flashes with tic-toc sound along with external
indicator lights.
If the indicator does not blink or blinking
fast, it means one of the external indicator bulb
may be fused. Replace the bulb as soon as
possible
2. High Beam Indicator:
This indicator lights up when the
headlamp high beam is ‘ON’.
3. Battery Charging Indicator:
This indicator lights up when ‘IGN’ is
turned ‘ON’ and goes ‘OFF’ after the engine
starts.
! CAUTION
If it remains ‘ON’ while the engine is running, it
indicates that the battery is not charging. Check
and rectify the problem.
4 Park Brake / Brake Fluid Oil level:
This indicator has multiple functions as
follows,
When ignition key is turned to ‘IGN’ position, it
lights up for 3 seconds and goes off.
It lights up with “park brake On” text message
when parking brake is applied and goes off
when parking brake is released.
It lights up with “Brake fluid low” text message
when brake fluid oil level is low.
5. Diesel Pre-Heat indicator
:
This indicator, applicable for diesel
engines, comes on when engine starting-aid is
provided by activating glow plugs. Engine should
be started only after this indicator goes off.
6. MIL indicator:
This indicator indicates your vehicle’s
engine condition when a malfunctioning occurs in
the engine, wiring harness and EMS etc. The
functioning of this lamp is as below,
Comes “ON” when key is in ‘IGN’ position and
goes ‘OFF’ when EMS performances the
system check.
Remains ‘ON’ if any fault in the EMS system.
! CAUTION
When “service/malfunction/Check Engine”
lamp is ON while engine is running, engine’s
performance
deteriorates
marginally
and
sometimes drastically. Check and rectify the
problem..
7. Low Engine Oil Pressure Indicator:
When the ignition key is turned to the
‘IGN’ position, symbol lights up and goes off as
soon as the required engine oil pressure is
developed after starting the engine.
If this indicator remains ‘ON’, when
engine is running, it indicates a fault in lubrication
system.
Check and rectify the problem.
8. Low Fuel Indicator:
It comes on when fuel level is low and
needs fuel refilling at the earliest. In case of any
related fault, it blinks.
Check and rectify the
problem.
9. High Temperature Warning:
This indicator lights up when engine is
hot, which may be due to insufficient coolant in
the coolant tank or due to any other defect.
Check
and rectify the problem.
! CAUTION
Never remove the radiator pressure cap from
the radiator when the engine is hot.
Do not restart the engine until the problem
has been duly attended.
10. Water in fuel indicator:
It will comes on when ignition is turned
'ON' and will goes off in ~ 3 seconds. This
indicator lights up continuously if there is excess
water accumulation in the sedi-menter, which
needs to be drained.
Check and rectify the
problem.
! CAUTION
If water is not drained from the sedimenter, it can
cause serious damage to engine.