Q501 4 Cylinder MT Application DTC Troubleshooting Data Version: 0.1 Date: 21-Sep-2018 Prepared By: Mithi Prasad, Sarang Kulkarni, Manish Gupta Checked By: Yogesh Jadhav Approved By: Satish Kumar P Page: 327 of 1052 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Trouble Shooting: Step Checks IF YES IF NO 1. Check for any ECU pin A50 short to ground or open circuit Go to step 2 Go to Step 3 2 Correct the open circuit or short to ground. Go to step3 Go to step 7 3 Read and clear the DTC using diagnostic tool Go to step 4 4 Fault Still Persists? If Fault still persists then Call Hot line. Follow the steps again for reconfirmation DTC’s confirmation: After rectification, Test Drive the vehicle for 2 KM and ensure that no DTC’s are logged in ECM. Circuit Schematic: NA Component Location & Image:- Connector View & Information: - Oil pressure switch
RkJQdWJsaXNoZXIy MTIwNTUz