Q501 4 Cylinder MT Application DTC Troubleshooting Data Version: 0.1 Date: 21-Sep-2018 Prepared By: Mithi Prasad, Sarang Kulkarni, Manish Gupta Checked By: Yogesh Jadhav Approved By: Satish Kumar P Page: 240 of 1052 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Step Checks IF YES IF NO 1. Give a battery reset to EMS and IMMO and give a Power latch of 15 secs and then Turn ON ignition. Problem resolved? Confirm that issue resolved and handover vehicle back to customer. Go to next step 2. Perform the Immo pairing using the diagnostic tool. Immo pairing successful? Go to next step Check whether the CAN Communication is healthy. If Yes, replace Immo / EMS and perform theImmo pairing. DTC’s confirmation (checks before handing over vehicle to customer): After the DTC clearing, vehicle should start, no error in immobilizer &Immo telltale off. Circuit Schematic: NA Component Location & Image:- NA Connector View & Information: -
RkJQdWJsaXNoZXIy MTIwNTUz