SAFARI BSVI SERVICE MANUAL

KRYOTEC ENGINE 98 16. Install the serpentine belt (Refer to 07 - Cooling/Accessory Drive/BELT, Serpentine/Removal and Installation). 17. Install the fuel filter (Refer to 14 - Fuel System/Fuel Delivery/FILTER, Fuel/Removal and Installation). 18. Install the air cleaner (Refer to 09 - Engine/Air Intake System/AIR CLEANER/Removal and Installation). 19. Install the right front wheelhouse splash shield (Refer to 23 - Body/Exterior/SHIELD, Splash/Removal and Installation). 20. Install the right front wheel (Refer to 22 - Tires and Wheels/Removal and Installation). 21. Install the turbocharger (Refer to 09 - Engine/Turbocharger System/TURBOCHARGER/Removal and Installation). 22. Install the Diesel Particulate Filter (Refer to 11 - Exhaust System/FILTER, Diesel Particulate/Removal and Installation). 23. Install the radiator (Refer to 07 - Cooling/Engine/RADIATOR, Engine Cooling/Removal and Installation). 24. Install the engine cooling fan (Refer to 07 - Cooling/Engine/FAN, Cooling/Removal and Installation). 25. Install the front bumper (Refer to 13 - Frame and Bumpers/Bumpers/FASCIA, Front/Removal and Installation). 26. Evacuate and charge the A/C system with refrigerant (Refer to 24 - Heating and Air Conditioning/Plumbing/ Standard Procedure). 27. Fill the cooling system (Refer to 07 - Cooling/Standard Procedure). 28. Install the belly pan (Refer to 13 - Frame and Bumpers/Under Body Protection/BELLY PAN/Removal and Installation). 29. Install the engine cover (Refer to 09 - Engine/COVER, Engine/Removal and Installation). 30. Connect the negative battery cable. E. BALANCE SHAFT REMOVAL 1. Remove the front wheels (Refer to 22 - Tires and Wheels/Removal and Installation). 2. Remove the front belly pan (Refer to 13 - Frame and Bumpers/Under Body Protection/BELLY PAN/Removal and Installation). 3. Remove the front wheel splash shields (Refer to 23 - Body/Exterior/SHIELD, Splash/Removal and Installation). 4. Remove the front fascia (Refer to 13 - Frame and Bumpers/Bumpers/FASCIA, Front/Removal and Installation). 5. Remove the front suspension crossmember (Refer to 13 - Frame and Bumpers/Frame/CROSSMEMBER, Front Suspension/Removal and Installation). 6. Drain the engine oil. 7. Remove the left and right half shafts (Refer to 03 - Differential and Driveline/Half Shaft/Removal and Installation). 8. Remove the engine cover (Refer to 09 - Engine/COVER, Engine/Removal and Installation). 9. Remove the battery (Refer to 08 - Electrical/Battery System/BATTERY/Removal and Installation). 10. Remove the battery tray (Refer to 08 - Electrical/Battery System/TRAY, Battery/Removal and Installation). 11. Remove the air cleaner body (Refer to 09 - Engine/Air Intake System/BODY, Air Cleaner/Removal and Installation). 12. Remove the transfer case, if equipped (Refer to 21 - Transmission and Transfer Case/Power Transfer Unit/ Removal and Installation) . 13. Remove the clutch, if equipped (Refer to 06 - Clutch/DISC, Clutch/Removal and Installation). 14. Remove the flywheel on vehicles with manual gearbox and 4x4 (Refer to 06 - Clutch/FLYWHEEL/Removal and Installation). 15. Remove the oil pan (Refer to 09 - Engine/Lubrication/PAN, Oil/Removal and Installation). 16. Remove the serpentine belt (Refer to 07 - Cooling/Accessory Drive/BELT, Serpentine/Removal and Installation). 17. Remove the vibration damper (Refer to 09 - Engine/Engine Block/DAMPER, Vibration/Removal and Installation).