SAFARI BSVI SERVICE MANUAL

KRYOTEC ENGINE 97 FITMENT 1. Using a NEW gasket, install the cylinder head cover (1a) and tighten the bolts (1b) to the proper (Torque Specifications). 2. Place the engine wiring duct in its housing and tighten the fixing screws. 3. Connect the quick coupling for the brake servo vacuum pipe, vacuum unit side, and engage the retaining clip. 4. Install the intake manifold mounting bracket and securely tighten the bolts. 5. Connect the upper A/C compressor wire harness connector. 6. Connect the lower A/C compressor wire harness connector. 7. Connect the oil pressure regulator wire harness connector. 8. Install the fuel rail (1) and tighten the bolts to the proper (Torque Specifications). 9. Connect the fuel pressure sensor wire harness connector (2). 10. Place the NEW fuel tube from the fuel injection pump to the fuel rail and tighten the union nut at the rail to the proper (Torque Specifications). 11. Tighten the fuel tube union nut (1) at the fuel injection pump to the proper (Torque Specifications). 12. Connect the fuel quantity solenoid wire harness connector. 13. Install the fuel injectors (Refer to 14 - Fuel System/Fuel Inspection/INJECTOR(S), Fuel/Removal and Installation). 14. Install the timing belt (Refer to 09 - Engine/Valve Timing/BELT, Timing/Removal and Installation). 15. Install the vibration damper (Refer to 09 - Engine/Engine Block/DAMPER, Vibration/Removal and Installation).