SAFARI BSVI SERVICE MANUAL

KRYOTEC ENGINE 99 18. Disconnect the electrical connector (1) from the fuel pressure sensor. 19. Unscrew the cap (2) on the timing cover. 20. Insert the balancer shaft locking tool (1). 21. Fit the balancer shaft locking tool in phase with the engine. 22. Remove the crankshaft cover and fit the crankshaft timing template (1). 23. Fit the balancer shaft locking tool (1) in phase with the engine. 24. Remove the bolts (2) and remove the balance shaft. 25. Remove the spacers and verify the integrity of the centering bushings. FITMENT 1. Install the balance shaft and tighten the bolts to the proper (Torque Specifications). 2. Remove the balancer shaft locking tool. 3. Remove the crankshaft timing template and install the front crankshaft cover. 4. Install the cap into the timing cover. 5. Connect the electrical connector to the fuel pressure sensor. 6. Install the serpentine belt (Refer to 07 - Cooling/Accessory Drive/BELT, Serpentine/Removal and Installation). 7. Install the oil pan (Refer to 09 - Engine/Lubrication/PAN, Oil/Removal and Installation). 8. Install the flywheel on vehicles with manual gearbox and 4x4 (Refer to 06 - Clutch/FLYWHEEL/Removal and Installation). 9. Install the clutch, if equipped (Refer to 06 - Clutch/DISC, Clutch/Removal and Installation). 10. Install the transfer case, if equipped (Refer to 21 - Transmission and Transfer Case/Power Transfer Unit/ Removal and Installation). 11. Install the air cleaner body (Refer to 09 - Engine/Air Intake System/BODY, Air Cleaner/Removal and Installation). 12. Install the battery tray (Refer to 08 - Electrical/Battery System/TRAY, Battery/Removal and Installation).