NANO

TRANSAXLE (NANO AMT) 95 12. Fit the rear half side ball bearing, using a drift 2702 5890 35 04 (Drift for rear hub inner bearing outer race), .Such that the groove on the shaft can be seen. 8. SHIFTER SHAFT AND SHIFTER FORK: A. DISMANTLING: 1. Position the first and second gear shifter shaft assembly in a bench vice and remove the Dowel pins and separate the shifter fork and shifter dog from the assembly. 2. Similarly, dismantle the third and fourth gear shifter shaft assembly and the reverse shifter shaft assembly. 3. Dismantle the reverse gear shifter bracket by unscrewing thePivot, and flange nut. 4. Remove the Reverse idler shifter finger and remove the detent assembly.