NANO

TRANSAXLE (NANO AMT) 96 5. Remove the 3 rd 4 th shifter shaft assembly from the 5 th gear shifter shaft assembly and take out the steel balls from the 5 th gear shifter shaft. NOTE: Take care of 8 Dia. balls while disassembling the 5 th / reverse and 3 rd / 4 th shifter shaft assembly 6. Remove the dowel from shifter dog and shifter fork. 7. Now remove the 5 th reverse shifter finger from shaft. 8. Remove the circlip. B. ASSEMBLY: 1. Assemble the first and second gear shifter by placing the shifter fork on its flat surface. 2. Insert the first and second gear shifter shaft such that the shaft end closer to the slot goes into the fork first as shown in the figure. 3. Then fit the dowels (spiral) pin such that it does not protrude out from both ends by holding the fork and shaft assembly in a vice and using a suitable drift.