NANO

420 DRIVETRAIN 5. Insert the tripod (4) in to driveshaft. 4. Fix the boot insert (7) inside the boot. NOTE : The metal clip (as shown by arrow) should be at bottom side of the boot insert. 3. Insert the boot and clamp (large) (6) up to the step given on driveshaft. Assembly of driveshaft 1. Make sure that both joints are washed thoroughly. Clean the tripod and tripod rollers thoroughly with diesel. Remove all traces of old grease and any contaminates. Dry all the parts. Inspect these parts for damage or wear. (If any of the parts are damaged, the entire subassembly needs to be replaced). Clean the boots with cloth if they are to be reused. NOTE : Do not wash boots in de-greaser, such as gasoline or kerosene etc. Washing in de-greaser causes deterioration of boot. 2. Insert boot clamp (small) (9) in to driveshaft. Do not crimp the clamp at this stage.