NANO

DRIVETRAIN 421 DRIVETRAIN CAUTION : Ensure that tripod with flat facing upwards and chamfer side towards bar shaft as tripod can be inserted in both ways. 6. Fix the circlip (3) and insert the tripod rollers (5). Chamfer 7. Fill the grease and insert the spring (2) into tulip joint. NOTE : 1. The quantity of grease to be filled inside the joints should be as per specified in kit (75g per joint). Do not apply any local grease instead always use recommended type provided with the kit. 2. The grease life is such that it doesn’t need any maintenance unless the boot is cut or any external leakage due to damage parts. CAUTION : Do not forget to insert spring inside the joint and make sure the spring aligns correctly with the groove of the joint.