NANO

DRIVETRAIN 419 DRIVETRAIN CAUTION : Clean tripod rollers with kerosene or diesel before assembly if it is to be reused. 6. Hold the drive shaft and take out tripod (4). 7. Remove the boot insert (7). 8. Loosen boot clamp (small) (9) by tapping with blunt screw driver. 9. Take out the boot (8) from drive shaft. Inspection : 1. Check boots for breakage or deterioration. Replace them as necessary. 2. Check circlip, boot clamps, rollers, tripod and joints for breakage or deformation. Replace them if necessary.