HEXA

FRONT AXLE (4X2) 8 3. Support the brake disc and press the stub axle shaft to separate it from brake disc and hub assembly. 4. Hold wheel hub and brake disc assembly on suitable fixture. Loosen brake disc mounting bolts and take out the brake disc. NOTE The wheel hub bearing is not separately serviceable. In case of bearing failure, the wheel hub with bearing has to be replaced. INSTALLATION OF WHEEL HUB ON STUB AXLE 1. Mount brake disc on wheel unitised bearing and tighten brake disc mounting bolts to specified torque (6.5 ± 1 Kg-m). NOTE Before assembly of wheel hub and brake disc on stub axle, antifretting paste LGAF 3E SKF (Part no. 5511 0869532) to be applied over the stub axle shaft at bearing seating surface using brush. 2. Assemble brake disc and wheel hub assembly on stub axle with the help of press.