HEXA

FRONT SUSPENSION 15 14.4 ON VEHICLE REPAIRS A. ANTI ROLL BAR (ARB) REMOVAL 1. Hoist the vehicle in two post lift and remove front wheels. 2. Remove the stone guard. 3. Support the lower wishbone, Lock the ball joint from being rotated using an Allen key (5mm) and disconnect the antiroll bar from the ball joint assembly by loosening the nyloc nut. Follow the same procedure at the other end also. CAUTION Make sure that before loosening the Nyloc nut one should use Allen key (5mm) to hold the ARB link ball stud, otherwise it may damage the ball joint. 4. Loosen and remove mounting bolts of bearing block clamp. Follow the same procedure at the other end. 5. Remove the ARB. INSPECTION  Check for any bends.  Check for any damage, grease leakage of ARB link ball joint. Replace with new one if necessary. ASSEMBLY For assembly follow the reverse procedure of removal. BALL JOINT PLAY (ANTI ROLL BAR LINK) Ball joint axial play 0.1 mm max. Ball joint radial play 0.15 mm max.