HEXA

TRANSMISSION 50 Oil Filter –Lip Seal Removing Procedure: 1. Drain the transmission. See Fluid Drain & Oil Pan Removing Procedure 2. Hand remove the Oil Filter and discard. Pull the fluid filter assembly straight out. Do not bend or twist the filter neck. 3. If the cover pump lip seal is totally or partially out of the cover pump housing or if the lip seal is damaged: Remove it by using a screwdriver or snap ring pliers. ● Discard the lip seal. ● Install a new lip seal (see cover pump lip seal installing procedure). NOTE: Good installation: The lip seal should be flushed. Oil Filter–Lip Seal Installing Procedure : 1. If cover pump seal is in place and not damaged. 2. Prior fitting the new cover pump lip seal, ensure no rubber debris in the cover pump bore. 3. Apply some transmission oil fluid on the seal. 4. Use the Dolly oil filter seal installer (287058902612) and for installing the filter seal. IMPORTANT : Insure Lip Seal properly installed, see Oil Filter – Lip Seal Removing Procedure. 5. Carefully install the fluid filter assembly by pushing straight in cover pump hole.