HEXA

TRANSMISSION 48 52. Remove the support transmission jack. 53. If a new transmission is installed, no need to follow the steps below, go to point 51. 54. Perform the fluid level. See Transmission Oil Level after repairs procedure. 55. Program the transmission module. 56. Enter the VIN into the transmission module using the diagnostic tool. 57. Clear any fault codes generated by the programming / replacing operation. 58. Road test the vehicle and release to customer. Torque Converter Removing Procedure: 1. Drain the transmission. See Fluid Drain and Oil Pan Removing Procedure. 2. Remove the transmission from vehicle. CAUTION: The transmission must remain in horizontal position to avoid converter to fall down. 3. Install the transmission on Hanger of Lifting Gear Box (287058902616). 4. Pull & remove the Torque Converter.