HEXA

TRANSMISSION 45 28. Reconnect the rubber tube on the transmission breather. 29. Install the crossbar and tighten the 6 screws to 8.6kgfm tightening torque. 30. Tighten the two crossbar nuts to Specified torque value. 31. Place new O-rings on the cooler lines. 32. Install the cooler lines, and tighten the screw to TML tightening torque 2.0 to 2.5kgfm. 33. Apply the 5GM of synthetic GREASE 365 SS6808 TS25205P1. 34. Install the transfer box. 35. Tighten the 6 transfer case nuts to tightening 4.6 to 5kgfm.