HEXA

TRANSMISSION 44 18. Tighten the screws to tightening torque 6 to 6.5kgfm. NOTE: Do not tighten before the 6 screws are in position. 19. Install the air filter & tighten the screws to Specified torque value. 20. Lift the vehicle to access to the transmission. 21. Control the starter motor dowel pin. If bend or damaged, replace it. 22. Install the starter motor cover. 23. Install the starter motor. 24. Tighten the 3 starter motor screws to 3kgfm tightening torque. 25. Connect the speed sensor on converter housing. NOTE: Do not touch the connector pins. 26. Connect the vehicle connector. See Mechatronic Removing Procedure. 27. Install the vent tube system and tighten the screws to tightening torque 0.9 to 1.0kgfm.