HEXA

TRANSMISSION 32 22. Connect the speed sensor on converter housing. NOTE: Do not touch the connector pins. 23. Install the vent tube system and tighten the screws to 0.9~1Kgfm. 24. Reconnect the rubber tube on the transmission breather. 25. Install the crossbar and tighten the 6 screws to 8.6kgfm tightening torque. 26. Tighten the two crossbar nuts to 4 kg-m. 27. Tighten the two rear mount nuts to 4 kg-m. 28. Place new O-rings on the cooler lines.