HEXA

TRANSMISSION 30 6. Install the transmission on transmission support jack and secure it with the safety chains. 7. Tilt slightly the transmission backward about 4° to 4.5° to avoid converter fall out. 8. Remove the converter stopper plate (2870 5890 2620). 9. Control the two engine dowel pins. If bend or damaged, replace them. 10. Control the ring around the flex plate for any bend or damaged tooth. If bend or damaged tooth, replace the flex plate. 11. Apply 3gms of synthetic grease 365SS6808 TS25205P1-Part No. 5541 0860 025 in convertor pilot hole of engine crankshaft. 12. Align the transmission with the engine dowels and push the transmission against the engine. WARNING: Damage to the flex plate could involve in malfunction of engine and or transmission. Insure clearance is maintained between the transmission and the following: -Vehicle wiring harness. -Vehicle to transmission cooler pipes. 13. Install 8 No’s NEW converter housing screws & tighten to torque of 4.6 to 5 Kgfm.