HEXA

ELECTRICAL 292 9. MIX WITH AUDIO By default, Park Assist volume is mixed with infotainment system audio. “Mix with Audio” option allows you to enjoy music even when park assist is active. With this option, Park Assist warning tone and media tone are smartly mixed together in such a manner that park assist warning tone sounds louder than media tone when park assist is active. 10.PARK ASSIST TONE You can select 3 different types of Park Assist tones. To change any tone, you have to following sequence of operations, Go to “Set up -> Vehicle Setup -> Park Assist - > Park Assist Volume ->Park Assist Volume -> Park Assist Tone “ 11.PARK ASSIST DELAY TIMER If Park Assist system is deactivated by “Reverse Gear”, it will take certain configurable time period to go to previous infotainment screen. This is to ensure that, Pak Assist should not switch off immediately for repeated engagements or disengagements of reverse gear. You can configure this delay time period by the following sequence of operations, “Set Up -> Vehicle Setup -> Park Assist ->Park Assist Delay Timer” 12.ULTRA PARK ASSIST HMI INDICATIONS In case of park assist fault or malfunction, following screens may appear on the infotainment music system. Critical Fault: Reasons for this fault might be a. Park Assist Controller failure b. Sensor malfunction c. Partner components such as Infotainment Music System or Instrument Cluster or Body Control Module failure. If you see above screen on Infotainment music system display, please contact TATA dealer for rectification. Warning: Reasons for this fault might be a. Trailer Connected to the vehicle. b. Vehicle speed is too high where Park Assist system can’t function