HEXA

ELECTRICAL 291 5. ULTRASONIC PARK ASSIST DEACTIVATION PROCEDURE Following table indicates the deactivation methods of Park Assist. You can deactivate by Reverser Gear Park Assist Button Music System user interface X button If you activated by Reverser Gear ✓ ✓ ✓ Park Assist Button ✖ ✓ ✓ Music System user interface ✖ ✓ ✓ Note: 1. While Park Assist is running, doing Ignition OFF will switch OFF the Park Assist functionality. 2. Before Ignition OFF, if reverse gear is already engaged then if you do Ignition ON, Park Assist will start automatically. There is no way to permanently disable Park Assist feature in the vehicle. 6. PARK ASSIST BUTTON LED INDICATIONS (IF EQUIPPED) Yellow LED located on Park Button which is on fascia switch will glow in the following scenarios to convey the user about healthiness, activation and deactivation state of Park Assist system. 1. On start of ignition, if the LED is ON for 1 second, this indicates park assist system is healthy. 2. On start of ignition, if the LED is getting ON and OFF for 10 times, this indicates Park Assist system failure due to any of the following reasons, such as one or more sensor failure, wiring harness failure, Park Assist Controller failure, Infotainment Music system failure, Instrument Cluster failure. There after Park Assist button never glows in that ignition cycle. If this occurs, please contact TATA dealer to resolve the problem. 3. If Park Assist feature is activated, LED will glow until it is deactivated. 7. PARK ASSIST AUDIO SETTINGS To change Park Assist audio settings related options, you have to do following sequence of operations. Go to “Set up -> Vehicle Setup -> Park Assist - > Park Assist Volume ->Park Assist Volume “ 8. PARK ASSIST VOLUME Increase or decrease volume by tapping ⊖ or ⊕ symbols on the infotainment music system touch screen.