HEXA

ELECTRICAL 95 8.8.9 WASHER PUMP REMOVAL: 1. Remove the front bumper assembly. ( For procedure refer body section ) 2. Disconnect the electrical connection of washer pump. 3. Disconnect the washer hose from the washer pump. 4. Pull out the washer pump from its location. INSPECTION: 1. Partially dip the washer pump in a water filled jar and connect battery (+) and (−) terminals to pump (+) and (−) terminals respectively to check pumping rate. 2. Connect the positive (+) lead from the battery to terminal 2 and the negative (−) lead to terminal 1, check that the pump operates. If operation is not as specified, replace the pump. ! CAUTION: These tests must be performed quickly to prevent the coil from burning out. REFITMENT: 1. Locate the washer pump on the washer bottle hole and press it inside. 2. Connect electrical connection to the washer pump. 3. Check for leakage. 4. Connect the washer hose to the washer pump. 5. Fit the front bumper assembly. ( For procedure refer body section)