HEXA

ELECTRICAL 94 REMOVAL: 1. Remove the front bumper assembly. ( For procedure refer body section ) 2. Disconnect the electrical connections of float sensor and washer pump. 3. Disconnect Hose connections of Wash Pumps and Filler pipe parking clips. 4. Remove three washer bottle mounting bolts, one filler neck mounting bolts along with washers. 5. Take out the washer bottle assembly. INSPECTION: Check the washer bottle for cracks and leakages if any. REFITMENT: 1. Align the washer bottle to match with mounting holes at three locations. 2. Route filler pipe on washer bottle mounting bracket with help of parking clips 3. Mount filler neck on filler neck mounting bkt and with fix bolt. Tightening torque for bolts -0.5 Kgfm 4. Connect the electrical connections to float sensor and washer pump. 5. Connect the filler pipe to washer bottle and washer hose to washer pump. 6. Fit the front bumper assembly. NOTE: After installation, add water up to the upper level of the washer bottle and check for water leakage.