HEXA

ELECTRICAL 57 10.SIDE REPEATER LAMPS (Part of ORVM) Side repeater lamps on ORVM not working 1. Connectors at the lamps loose. 1. Fix the connector properly. 2. LED's not working 2. Replace ORVM. 3. BCM o/p wire loose/short to ground. 3. Repair the wiring harness. 4. Combi switch faulty. 4. Replace combi switch. 5. Grounding point loose. 5. Tighten the grounding properly. 11.MOOD LAMPS Single Mood lamp not working. 1. Wires pinched / cut in Floor LH/ RH wiring harness wrt non-working lamp Rectify / Replace harness 2. Faulty Mood Lamp Module Check the working module for same zone (Front zone – Driver Door and Co- Driver Door and both foot- well lamps, rear zone – Rear LH and NOTE: 1. Lamps form same zone are identical and different zones lamps are having different LIN identification 2. Should not check direct voltages at Mood Lamps as these lamps are driven on LIN communication.