HEXA

STEERING 38 5. Never store / transport steering gear with bellows / feed pipes fouling with other objects. 6. Never remove port plug before connecting with mating parts. 7. Do not remove the feed pipe assembly from the gear port; remove it only when replacing the feed pipe. 8. Never use cotton waste which will cause contamination. 9. Do not adjust ball joint nuts except during wheel alignment 10. Never lift steering gear by holding IBJ’s. NOTE:  Bellow is a seal. Do not use sharp tools near bellows if it can damage bellows. CAUTION:  Damaged bellow or absence of clip can cause water ingress and subsequent failure of Power steering. 11. Do not remove the protective cap from the input shaft during transit or before assy.