HEXA

REAR AXLE 37 8. Insert small OD end of turning bar into cross pin hole of case. Pull on bar and case will rotate until the pinion mate gears can be removed from opening. 9. It might be necessary to adjust the forcing screw slightly to allow the case to rotate. 10.Hold top clutch pack with one hand and remove tools. 11.It might be necessary to hold threaded adaptor with screw driver. 12.Remove top side gear and clutch pack. Keep the stack of plates and discs intact in exactly the same position while they are being removed. Remove the case from the axle shaft. Turn case with the flange or ring gear side up and allow the step plate, side gear and clutch pack to be removed from the case. 13.Remove move the retainer clips from both clutch packs to allow separation of plates and discs. Keep the stack of plates and discs exact as they were removed.