HEXA

REAR AXLE 36 V LIMITED SLIP DIFFERENTIAL DISMANTLING 1. Separate Ring Gear from Differential case. (Follow the same procedure as that of standard differential case dismantling procedure) 2. Remove roll pin and diff shaft from Differential case. (Follow the same procedure as that of standard differential case dismantling procedure) 3. Assemble the adaptor plate (Part No. 287058903508) into the bottom side gear. Apply small amount of grease to centering hole of adaptor plate. 4. Assemble threaded adaptor (Part No. 287058903508) in top side gear Use small screw driver to position in slot of threaded adaptor. 5. Torque forcing screw of (Part No. 287058903508) until it becomes slightly tight. 6. Remove both pinion mate spherical washers. Use shim stock of 0.76mm (0.030”) thick or equivalent to push out spherical washer 7. Relieve Tension of the Belleville springs by loosening the forcing screw.