HEXA

REAR AXLE 14 8. Make sure that rear axle assembly is properly supported from below, then loosen and remove the mounting bolt of pan hard rod, follow the same procedure at the other end also. 9. Loosen and remove the mounting bolts of lower link assembly and separate the link from the vehicle, follow the same procedure at the other end also. 10.Loosen and remove the lower mounting nut of the rear shock absorber. 11.Loosen and remove two mounting bolts from the top. 12.Tap gently and take out the shock absorber from the lower end to disconnect from the rear axle and remove the Shock absorber. 13.Lift the vehicle upward through two post lift as rear axle is now free from the vehicle and take out the coil spring. FITMENT For fitment follow reverse procedure of removal.