HEXA

FRONT AXLE (4X4) 28 13.Assemble dummy differential bearings (Part No. 270458903309) in to the differential case using dolly (Part No. 270458903325). 14.Assemble differential case into carrier. (Without Ring Gear.) 15.Mount dial indicator with a magnetic base. Locate its tip on that surface of case and force differential assembly to the extreme in the direction towards the indicator. 16.With force still applied, set indicator to zero. Force differential assembly to the extreme end in opposite direction. 17.Repeat above steps until the same reading is obtained. 18.Record reading in the format given as 'A'. 19.Remove dummy bearings (Part No. 2704 5890 33 09) and set aside. 20.Assemble ring gear to case. Torque ring gear screws to specification. NOTE Use new ring gear screws at the time of assembly. 21.Again assemble master differential bearings (Part No. 2704 589 033 09) on to differential case.