SAFARI STORME MY14

Rear Axle 12 Remove ring gear screws. Remove ring gear. If required tap ring gear with a mallet to free it from case. Note: Discard ring gear screws and replace with new ones. 3.3 CASE DISASSEMBLY: Remove DiffShaft & Differential Gear Remove Diffshaft: Clamp anyone (LH/RH) of axle shafts in vice firmly. Caution: Vice jaws should not locate on axle Splines or any machined surfaces. Install differential case on axle shaft. To remove side gears and pinion mate gears, rotate the side gears. This will allow the pinion mate gears to turn to opening of the case. Remove pinion mate gears and spherical washers behind the gears. Lift outside gears and thrust washers. Inspect all parts, including the machined surfaces of the case itself. Where necessary, replace all worn parts. If excessive wear is noticed on all parts, it is recommended that the complete differential assembly to be replaced. If any gears are to be replaced, they must be replaced as sets.