SAFARI STORME MY14

Rear Axle 11 Note: Identification marks are punched on bearing cap; this is to ensure correct bearing cap is installed on correct side. Ensure correct bearing caps used while reassembly. Remove Diffcase Assy. Mount spreader on carrier & spread carrier by rotating nut on spreader. Do not spread carrier more than 0.58 mm. Pry out differential case from carrier with help of Tommy bars Remove spreader. 3.2 RING GEAR REMOVAL Remove Differential Case Bearings/Separate Ring Gear: Remove side bearing cone from Diffcase assy using tool .1. Adapter, differential bearing cone 2. Identify shims and side bearings on both sides. They are not to be interchanged during assembly. If shims are damaged, replace with new shims during assembly. Reposition case in puller and remove side bearing cone on the other side in same manner. Note : It is always preferred to replace side bearings once pulled out. But one can confirm free rolling of bearings and reuse it, if they are defect free. Separate Ring Gear: Open lock strap strips with help of punch.