193 / 801
LV ELECTRICAL SYSTEM
107
K. Reverse park assist limitations
Reverse Park Assist system is not a collision
avoiding system. lt is solely the driver‘s
responsibility to park the vehicle safely.
Reverse Park Assist feature works on ultra sound
echo technology, due to which performance is not
guaranteed in following scenarios:
•
If the object has a sharp edge surface, where
surface may divert echoes from sensor
reception.
•
If object is mesh fence made up of thin wires,
where echoes can't be given by the surface.
•
Fast moving objects passes in the sensor field
of detection, where echoes are not processed
by the system.
•
If object is made/covered by foam, sponge, or
snow where ultrasonic sound signals are
absorbed.
•
Objects close to the rear bumper can go
undetected by the Reverse Park Assist field of
detection. Driver should use extreme caution
while parking the vehicle.
WARNING
Due to any reason, if the sensor gets misaligned
or loses its intended fitment position, contact your
dealer for refitment.
NOTE
Turning the ignition ‘OFF’ ‘while the Park assist
feature in running would disable the feature.
L. Reverse park assist system preventive
maintenance
1. Regularly clean the sensors and keep them
free from dust, ice, mud, water, chewing gum etc.
for proper working of the system. Use a smooth
cloth for cleaning.
2. Do not use water at high pressure for cleaning
the sensor or camera.
3. Do not cover the sensor surface with any
additional fitment. This will interrupt park assist
performance.
4. Don’t apply external colors, styling stickers,
chewing gums, or any material, which will stick on
the sensors. This will degrade park assist
performance.
5. Don’t put any object like spare tyres or footrest
or number plate, which will cover the sensor and
obstruct its field of detection
M. Vehicle parking
Park the vehicle in a safe place.
Switch on the indicator signal before turning to
park.
Apply the parking brake.
Ensure that all window glasses are closed and all
lamps are turned ‘OFF’.
At night, put on the parking lights if required.
Remove the key from the ignition switch and lock
the vehicle.
Block the wheel if parked on a slope.
NOTE
•
When parking on a downhill gradient, place the
gear lever in ‘Reverse’ position. While parking
on uphill gradient, place the gear lever in the
‘1st’ position.
•
Do not use parking brake for braking unless
unavoidable circumstances like when service
brake is not working properly. The braking
distance is considerably longer and the wheels
could lock. There is an increased danger of
skidding and accidents.
WARNING
Never leave children unsupervised in the parked
vehicle. They could also operate the vehicle's
equipment. There is a risk of an accident and
injury.