77 / 745
KRYOTEC ENGINE
69
6. Loosen the drain plug and allow the coolant
to drain into the container.
7. Drain the coolant reservoir and rinse out any
sediment.
8. Use fresh water to reverse flush the radiator
from the drain to the coolant reservoir bottle.
9. Close the coolant drain plug on the radiator.
10. Add the recommended brand of pre-mixed
40:60 ratio coolant to the reservoir until the
coolant level is
at the 'MAX' mark on the
bottle.
11. Start the engine and gradually increase
engine speed to allow the engine to reach 85-
90
o
C, which allows the thermostat to open.
12. Allow the engine to return to idle speed.
13. Stop the engine and allow to cool sufficiently.
14. Add pre-mixed 40:60 ratio coolant to the
reservoir until the coolant level is at the 'MAX'
mark on the bottle.
iii. AIR FILTER ELEMENT REPLACEMENT
DESCRIPTION
Proper maintenance of the air filter is essential
for vehicle performance and fuel economy. The
air filter element removes foreign material such
as dust, dirt, and other material from the
intake air, thereby preventing the engine from
damage due to contaminated air.
Inspect and replace the air filter element.
Replace the air filter element as per service
schedule.
REMOVAL
1. Park the vehicle on a level surface, engage
the parking brake, and raise the hood.
2. Disconnect electrical connection to MAF
sensor.
3. Unscrew the top six mounting bolts of air filter
assembly.
4. Move aside the top cover of air filter along
with air duct and remove the air filter element.