1885 / 4910
Vehicle Platform: Tiago,Tigor & Osprey
ECU Name: Hella Body Control Module (BCM)
DTC Troubleshooting Data
Version: 2.0
Date: 22-10-2018
Author: Parag K
Page: 542 of 737
Copyright ©
TATA MOTORS Ltd.
This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author.
B220E - 11: Front Wiper High Speed Switch - Circuit Short to Ground
Overview:
ISO Code (DTC Code)
B220E - 11
Customer Symptom
Front wiper always ON (high Speed)
Fault Effects (On Vehicle)
Front wiper always ON(high speed)
Lamp Status (If Any)
NA
Fault Detection Condition
This fault will be logged after the input switch test routine
execution. User has to operate the switch manually during
routine. If short to ground fault is detected for Front wiper high
speed switch then this DTC code will be returned with the
Routine results.
Normal Operating Condition
There should not be any fault returned by routine
Probable Trouble Area
1. BCM connector Fault
2. Cockpit wiring harness short to ground
3. Front wiper high speed switch damaged
4. Combi switch connector fault.
5. BCM ECU fault
Healing Condition
1. Ignition OFF
ON
2. Clear DTC Command
Component Details:
Front wiper high speed switch is part of combination stalk switch and interfaced to the BCM. If the IGN is on and if
user put the combi switch to front wiper high speed position, front wiper will turn ON in high speed.
Preliminary Checks:
1. Check Battery Voltage (9V-16V)
2. Check ECU pins for oxidation, bending & damage.
Trouble Shooting:-