146 / 1906
ENGINE
110
WARNING
Do not suck air through tank pressure
valve. Fuel Vapour inside the valve is
harmful.
FITMENT :
1. Fit the TPV in the clamp such that the open
side (orange side) faces the rear of the
vehicle.
2. Connect the vapour line to the Tank unit side
(black side) and fix the clamp.
CAUTION
Do not kink/pinch or twist hose when they are
routed.
3.
Fix the TPV cap.
S. Fuel Tank Purging Procedure :
WARNING
The purging may not remove all fuel
vapours. Therefore any repair on fuel tank
using external heat or flame may result in
explosion causing personal injury or
damage.
1. Remove fuel tank from the vehicle. Refer
procedure as mentioned for fuel tank removal.
2. Remove all fuel lines from fuel tank.
3. Remove fuel pump and fuel level gauge from
fuel tank.
4. Shift the tank to flushing area.
5. Fill tank with warm water or normal tap water
and agitate rigorously and drain the water
through drain plug. Repeat this procedure
until inside of the tank is clean.
6. Replace the fuel tank if it is rusty from inside.
7. Completely flush out remaining water after
washing.
CAUTION
Do not allow water to remain inside fuel
tank after washing. This will cause
corrosion inside fuel tank. Use shop cotton
cloth for tank cleaning. Do not use cotton
waste.