HEXA

TRANSMISSION

18. Tighten the screws to tightening torque 6 to

6.5kgfm.

NOTE:

Do not tighten before the 6 screws are in

position.

19. Install the air filter & tighten the screws to

Specified torque value.

20. Lift the vehicle to access to the transmission.

21. Control the starter motor dowel pin. If bend or

damaged, replace it.

22. Install the starter motor cover.

23. Install the starter motor.

24. Tighten the 3 starter motor screws to 3kgfm

tightening torque.

25. Connect the speed sensor on converter

housing.

NOTE:

Do not touch the connector pins.

26. Connect the vehicle connector. See

Mechatronic Removing Procedure.

27. Install the vent tube system and tighten the

screws to tightening torque 0.9 to 1.0kgfm.