875 / 1428
ENGINE COMPONENTS
7
3.0 RADIATOR REMOVAL AND RE-
FITMENT ON VEHICLE:-
Cooling System Precautions:
WARNING
1.
Coolant is poisonous to humans and
animals. Do not ingest. It may cause injury
and even death.
2.
Do not remove the coolant reservoir cap
while the engine cooling system is still hot.
It may spray out hot coolant and steam
causing severe burns.
CAUTION
Do not remove the coolant reservoir cap while
the engine cooling system is still hot. It may
spray out hot coolant and steam causing
severe burns.
NOTE
Always dispose engine coolant properly to
avoid harming the environment.
1. Allow Engine and Radiator to cool down till
ambient temperature.
2. Always disconnect the battery negative (-)
cable to prevent operating of radiator fan
accidently.
3. Always drain the entire cooling system and fill
with fresh premixed coolant. Do not reuse
previously drained coolant. Presence of dirt in
coolant chokes up passages in radiator,
cylinder head and crankcase, thereby causing
overheating of engine.
4. Always add the recommended brand and
mixture of coolant to the engine cooling
system. Using a mixture or brand other than
recommended may damage the cooling
system components.
5. Using recommended premixed coolant
prevents rust formation and freezing of
coolant inside the passages of radiator,
crankcase and cylinder head.
Removal:
1. Open the front bonnet.
2. Turn the wheel to lock to lock position.
3. Remove all mounting screws of fender liner.
4. Remove fender liner.