661 / 1428
ELECTRICAL
649
ELECTRICAL
CONDITION
POSSIBLE CAUSES
CORRECTION/REFERENCE ITEM
3. FRONT TURN SIGNAL LAMPS
Front right / left signal lamps not
1) Grounding point in engine Tighten the grounding properly
working
compartment loose
2) Connector at the lamp
Fix the connector properly
(2 pole) loose
3) Bulb loose/fused
Fix the bulb properly. Replace
bulb if blown
4. REVERSE LAMPS
Single reverse lamp not working 1) Grounding point loose
Tighten grounding properly
2) Bulb loose/fused
Fix the bulb properly. Replace bulb if
blown
3) 6 pole connector frommain Fix the connector properly
W/H to Rear Cluster Lamp
loose.
Both reverse lamps not working 1) Reverse lamp fuse (10A) in Fix the fuse in the base firmly. If blown,
cabin fuse box loose / blown check for short in the circuit and then
replace the fuse
2) Reverse lamp switch faulty Replace reverse lamp switch
5. PARKING LAMPS
Single parking lamp rear not
1) Grounding point loose
Tighten grounding properly
working
2) Parking lamp LH/RH fuse Fix the fuse in the base firmly. If blown,
(10A) in cabin fuse box loose/ check for short in the circuit and then
blown
replace the fuse
3) 6 pole connector from floor Fix the terminal properly
W/H to Rear cluster lamp
loose
4) Bulb loose / fused
Fix the bulb properly. Replace bulb if
blown
5) Battery supply not reaching Check the continuity from battery to
parking lamp LH/RH fuse the lamps through the combi-switch,
input
Front W/H and Floor W/H connectors
and rectify the discontinuity in the
circuit
Both parking lamps not
1) Combi switch connectors Fix the connectors properly
working at all
loose/20 pole connector
from Front W/H to Cabin
W/H loose
2) Combi switch faulty
Replace combi -switch