NANO

ELECTRICAL

649

ELECTRICAL

CONDITION

POSSIBLE CAUSES

CORRECTION/REFERENCE ITEM

3. FRONT TURN SIGNAL LAMPS

Front right / left signal lamps not

1) Grounding point in engine Tighten the grounding properly

working

compartment loose

2) Connector at the lamp

Fix the connector properly

(2 pole) loose

3) Bulb loose/fused

Fix the bulb properly. Replace

bulb if blown

4. REVERSE LAMPS

Single reverse lamp not working 1) Grounding point loose

Tighten grounding properly

2) Bulb loose/fused

Fix the bulb properly. Replace bulb if

blown

3) 6 pole connector frommain Fix the connector properly

W/H to Rear Cluster Lamp

loose.

Both reverse lamps not working 1) Reverse lamp fuse (10A) in Fix the fuse in the base firmly. If blown,

cabin fuse box loose / blown check for short in the circuit and then

replace the fuse

2) Reverse lamp switch faulty Replace reverse lamp switch

5. PARKING LAMPS

Single parking lamp rear not

1) Grounding point loose

Tighten grounding properly

working

2) Parking lamp LH/RH fuse Fix the fuse in the base firmly. If blown,

(10A) in cabin fuse box loose/ check for short in the circuit and then

blown

replace the fuse

3) 6 pole connector from floor Fix the terminal properly

W/H to Rear cluster lamp

loose

4) Bulb loose / fused

Fix the bulb properly. Replace bulb if

blown

5) Battery supply not reaching Check the continuity from battery to

parking lamp LH/RH fuse the lamps through the combi-switch,

input

Front W/H and Floor W/H connectors

and rectify the discontinuity in the

circuit

Both parking lamps not

1) Combi switch connectors Fix the connectors properly

working at all

loose/20 pole connector

from Front W/H to Cabin

W/H loose

2) Combi switch faulty

Replace combi -switch