TRANSAXLE - TA5260 33 Use the open-end spanner 30 mm and turn the pulling nut clockwise, do not allow anchoring shaft to turn along with pulling nut. It will start to pull the bearing out from the casing. Turn the pulling nut (30 mm) till the bearing comes out completely from the casing. Once the bearing comes out, unlock the anchoring shaft by turning the locking nut anticlockwise on the top and slowly tap on the locking stud down to unlock the bearing from anchoring body and to remove bearing from the tool. 24. Remove taper roller bearings Outer Race using puller part no. 5438 5890 2603 from housing. Bearing Outer race removal from Rear Housing Bearing Outer race removal from Front Housing.
RkJQdWJsaXNoZXIy MTIwNTUz