TRANSAXLE - TA5260 34 Outer Race Bearing Puller 5438 5890 2603 Conical Spacer 5438 5890 2603 NOTE: SHIMS SHOULD NOT BE REUSED. NOTE: 1. Apply anabond 112 on threads of all fasteners 2. Apply silicon liquid gasket anabond 690 on housing interface. 3. The chips collected by magnetic drain plug, are to be removed at the time of every oil change. 4. Keep inner and outer races of taper roller bearing in sets. 5. Use sealing anaerobic compound for all oil seals outer diameter. 6. For oil seals of input drive shaft and bellows use anabond 112. A. DISASSEMBLY OF INPUT SHAFT 1. Remove Locking Screw M20 X 1.5 by interlocking Input & Lay shaft Assembly in Gear Box Housing. Input shaft Locking Plate 5412 5890 2608 2. Remove deep groove ball bearing, Retaining carrier plate, Engaging gear Assy., synchronizer with 5th speed gear with the help of Drift 2834 5890 2607 & support plate 5412 5890 2606.
RkJQdWJsaXNoZXIy MTIwNTUz